手板模型的加工過程是一個非常重要的環節，但是在手板制作的時候，需要做的就是根據客戶的要求很好的檢驗產品制作的環節是否會出現很多的問題，是否會在很多結構設計和外觀設計的環節上出現一些意想不到的問題。這個過程手板廠需要不斷的反思，不斷改進，不斷的將產品的每個細節都做到位，才能很大程度上滿足客戶在檢驗產品設計合理性的基礎上進行好的思考。

The processing process of the prototype model is a very important step, but when making the prototype, it is necessary to check whether there will be many problems in the product production process according to the customer's requirements, and whether there will be unexpected problems in many structural and appearance design stages. In this process, the prototype factory needs to constantly reflect and improve, constantly putting every detail of the product into place, in order to greatly meet the needs of customers for good thinking on the basis of verifying the rationality of product design.

一般是手板模型加工方式有：

The general processing methods for prototype models include:

1、CNC手板：加工精度可以達到±0.05mm。CNC手板加工方式的主要材料有：ABS、PC、PMMA、PA 、POM、PA+玻纖、電木。其中ABS是非常常見也非常常用的塑膠材料，PC、PMMA為加工透明件手板所用，PC為半透 明狀態，PMMA為全透明狀態，如手機的鏡片，眼鏡等。

1. CNC prototype: The machining accuracy can reach ± 0.05mm. The main materials used for CNC prototype processing include ABS, PC, PMMA, PA, POM, PA+fiberglass, and bakelite. Among them, ABS is the most common and commonly used plastic material, PC and PMMA are used for processing transparent handboards, PC is in a semi transparent state, and PMMA is in a fully transparent state, such as the lenses of mobile phones, glasses, etc.

2、復模手板：加工精度為±0.15mm/100mm。其材料為液體PU，性能有類ABS、類PC等。對于小批量10~100 套左右的塑膠產品來說，此加工工藝是非常為合適，價格周期都占有優勢，是短期小批量產品的好方法。

2. Duplex template: machining accuracy of ± 0.15mm/100mm. Its material is liquid PU, with properties such as ABS and PC. For small batch plastic products of around 10-100 sets, this processing technology is the most suitable and has an advantage in price cycle, making it a good method for short-term small batch products.

3、SLA手板：加工精度為±0.1mm。對于一些形狀復雜表面精細的零件是比較適合的，比如玩具、工藝品 等。但因?yàn)槠浼庸ぞ容^CNC手板較低，材料較脆，制作出來的塑膠手板不利于結構認證，所以我們認為，SLA 激光快速成型非常大的使用價值在于他能與CNC加工形成良好的互補作用，它可以完成CNC加工不到的細節。

3. SLA prototype: machining accuracy is ± 0.1mm. It is more suitable for parts with complex shapes and fine surfaces, such as toys, handicrafts, etc. However, due to its lower processing accuracy and brittle material compared to CNC handboards, the plastic handboards produced are not conducive to structural certification. Therefore, we believe that the greatest value of SLA laser rapid prototyping lies in its ability to form a good complementary effect with CNC machining, and it can complete details that CNC machining cannot achieve.

有時候客戶設計出來一款產品制作手板的交期自己也不知道該怎么處理這些問題，他們往往只是憑著一個又一個的想象力，將產品的功能劃分為每個區間，但是真正的能好好的利用手板樣品為設計做思考的，還是很難做到這樣的處理方式的，為了能保證設計的時候非常小化的風險，我們需要在產品設計的環節進行深入的思考，并且在產品設計的每個步驟上進行一些小的思考，進行一些很好的局部的改進和設計，在手板價格上做到非常便宜非常好了，并且利用科學的換位思考進行產品的功能定位，那么手板模型的加工才能更好的起到作用，才能更好的將設計做到盡善盡美。

Sometimes customers may not know how to handle the delivery time of a product design prototype. They often just rely on one imagination after another to divide the product's functions into each section. However, it is still difficult to achieve such a processing method if they can truly make good use of prototype samples to think about the design. In order to minimize risks during the design process, we need to think deeply in the product design stage, and make some good local improvements and designs at each step of the product design. We need to achieve the cheapest and best prototype price, and use scientific empathy to position the product's functions. Therefore, the processing of prototype models is necessary. Only by doing so can we better serve our purpose and achieve perfection in our design.