1.擠壓并拉直

1. Squeeze and straighten

矯直是鋁型材外殼生產過程中非常重要的一個環節。矯直工人建議注意矯直所用的力。如果用力過大，可能會導致鋁型材變形、合攏、橘皮等問題；如果力太小，可能會導致不直，導致彎曲等問題。所以一定要把握好實力。

Straightening is a very important step in the production process of aluminum profile shells. Straightening workers must pay attention to the force used for straightening. If too much force is applied, it may cause problems such as deformation, folding, and orange peel of the aluminum profile; If the force is too small, it may cause unevenness, bending and other problems. So we must grasp our strength well.

2.擠壓裝框

2. Squeeze framing

這個鏈接也很重要。鋸切到一定長度后，將鋁型材裝框。這時，裝幀機要注意：材料是大是小，是帶管的材料還是從平模拉出的材料，一般來說，大的材料不容易造成彎曲。將帶管的物料在兩端吊起裝框。，但小料和從平模拉出的料在兩端抬起時很容易彎曲。此時應將材料從兩端向中間提起并裝框。但是，有些鋁型材還是不夠用的，比如：百葉窗、窗戶、壓蓋等，這些材料建議放在老化的鋁型材上，然后吊入框架中。

This link is also very important. After sawing to a certain length, frame the aluminum profile. At this point, the binding machine should pay attention to whether the material is large or small, whether it is a material with a tube or a material pulled from a flat mold. Generally speaking, large materials are not easy to cause bending. Lift and frame the material with tubes at both ends., But small materials and materials pulled out from the flat mold are prone to bending when lifted at both ends. At this point, the material should be lifted from both ends to the middle and framed. However, some aluminum profiles are still not enough, such as blinds, windows, covers, etc. These materials must be placed on aged aluminum profiles and then hung into the frame.

3、表面處理上架

3. Surface treatment shelving

坯料已經老化，硬度達到標準，所以鋁型材沒有那么容易彎曲，但是上架還是要注意的。兩端吊料時，盡量避免上下劇烈波動，也會造成鋁型材外殼老化。一定的彎曲。

The billet has aged and the hardness has reached the standard, so the aluminum profile is not so easy to bend, but attention should still be paid when putting it on the shelf. When lifting materials at both ends, try to avoid violent fluctuations up and down, which may also cause aging of the aluminum profile shell. A certain degree of bending.

鋁殼廠家在加工中要多注意以上三點。與塑料外殼相比，鋁合金外殼加工相對簡單，硬度好，超過了很多塑料和金屬的強度。未來的發展前景非常可觀。注意相關細節，提高產品質量，避免報廢的發生。

Aluminum shell manufacturers should pay more attention to the above three points during processing. Compared with plastic shells, aluminum alloy shells are relatively easy to process, have good hardness, and exceed the strength of many plastics and metals. The future development prospects are very promising. Pay attention to relevant details, improve product quality, and avoid the occurrence of scrap.